News

The introduction of a new 5 axis milling cell to deliver additional insert preparation capacity prior to heat treatment. The cell is managed offline and includes a multi station robot ensuring high utilisation and output through 24/7 production.     ...

  CaviTech have successfully completed a mould solution for a complex Housing component for a medical device application. The challenge required a significant amount of EDM and the complexity of the geometry resulted in many electrodes, rigorous procedures and attention to detail. The solution included pressure transducers within the mould and an integrated component detection system. The validation was conducted in our mould test centre and when...

The addition of a 350t injection moulding machine to our on site test centre has extended our single shot size range with the added scope to offer a 2 shot capability with the vertical second barrel. The all electric machine is equipped with a water flow monitoring system for use during mould validation of personal care and pharma mould applications.  ...

CaviTech have recently completed a mould for the high volume manufacture of a medical device component. The solution is an upscale of an earlier 16 cavity variant. It includes a valve gate hot runner and stripper ejection. The mould was validated in our test centre, then dispatched with interchangeable spare parts to its production location. ...

  CaviTech have recently delivered a suite of moulds used for the manufacture of components for a medical application. The solutions include valve gate hot runners and stripper ejection. The validation was conducted in our mould test centre and when accepted the moulds were then dispatched with interchangeable spare parts to the production location....